Volex Labs / Forge / Hinge generator — text to CAD.

Hinge generator — text to CAD.

Describe the hinge — leaf size, knuckle count, pin diameter and screw holes — and Volex Forge returns a manufacturable hinge as a STEP, a print-ready STL, or a DXF flat pattern.

Knuckles interleave with the right clearance and the pin bore lines up, so the hinge swings freely straight off the machine.

Free to try Parts from £2.99 STEP · STL · DXF FEA-verified

What you get

From a plain-English prompt

50 mm steel butt hingeExample — your parameters, your file
a 50mm steel butt hinge, 40mm leaf width, 4mm pin
ParameterValue
TypeButt hinge — two leaves and a pin
Length along the pin50.0 mm
Open width80.0 mm — 40.0 mm per leaf
Knuckle barrel9.0 mm
Pinø4.0 mm
Leaf thickness3.2 mm
Bodies in the file3
ExportSTEP / STL / DXF
Every part is checked before you download it — geometry, and where relevant FEA against textbook theory. See the verification report.

Frequently asked

How many knuckles, and are there screw holes?
Two knuckles, one per leaf, and no screw holes — that is what the template above builds, and the table says so. A five-knuckle leaf with countersunk holes to a pattern goes through Forge's AI path; describe it and check the result.
How many knuckles, and are there screw holes?
Two knuckles, one per leaf, and no screw holes — that is what the template above builds, and the table says so. A five-knuckle leaf with countersunk holes to a pattern goes through Forge's AI path; describe it and check the result.
Can it be print-in-place?
Yes — ask for a print-in-place hinge and Forge sets the knuckle clearance so it prints as one moving part.
Countersunk or plain holes?
Either; give the screw size and Forge countersinks to suit.
Piano hinge?
Yes, set a long leaf and many knuckles for a continuous piano hinge.
Cost?
Free to try, parts from £2.99.

More Forge generators

A hinge that swings free, first print.

Free to try · parts from £2.99 · STEP, STL or DXF · every part verified before download.

Generate it in Forge →