Volex Labs / Forge / Enclosure & housing generator — text to CAD.

Enclosure & housing generator — text to CAD.

Describe the box — internal size, wall thickness, corner radius, PCB standoffs and a lid — and Forge builds a printable enclosure and lid as STEP or STL, sized around your electronics.

Standoffs, screw bosses and cut-outs land where you specify, so your board and connectors fit without trimming.

Free to try Parts from £2.99 STEP · STL · DXF FEA-verified

What you get

From a plain-English prompt

Hand-held ABS enclosure with lidExample — your parameters, your file
an enclosure 100 x 60 x 30mm, 2.5mm walls
ParameterValue
External size100.0 × 60.0 × 30.0 mm
Wall thickness2.5 mm
Internal cavity95.0 × 55.0 × 25.0 mm
FormOne closed shell — the lid is not a separate body
Bodies in the file1
ExportSTEP / STL
Every part is checked before you download it — geometry, and where relevant FEA against textbook theory. See the verification report.

Frequently asked

Can I get PCB standoffs, a corner radius and a screwed lid?
Not from the parametric template that built the example above — it makes the shell, with square corners and no separate lid. Describe those features and the prompt goes to Forge's AI path, which can add them; check what comes back against your board before you order.
Is the size I give the inside or the outside?
The outside, the way enclosures are sold. The example above is a 100 × 60 × 30 mm shell with 2.5 mm walls, so the usable cavity is 95 × 55 × 25 mm — which is in the table, because that is the number you size a board to.
Is the size I give the inside or the outside?
The outside, the way enclosures are sold. The example above is a 100 × 60 × 30 mm shell with 2.5 mm walls, so the usable cavity is 95 × 55 × 25 mm — which is in the table, because that is the number you size a board to.
Can I add cut-outs for connectors?
Yes — describe the connector openings and their positions and Forge cuts them into the wall.
Is it ready to print?
Yes, the STL is print-ready with sensible wall thickness; the lid is a separate body.
Price?
Free to try; a downloadable enclosure is from £2.99.

More Forge generators

An enclosure built around your board.

Free to try · parts from £2.99 · STEP, STL or DXF · every part verified before download.

Generate it in Forge →