Volex Labs / Forge / Pipe clamp generator — text to CAD.

Pipe clamp generator — text to CAD.

Describe the clamp — the pipe or tube diameter it grips, the width, and the bolt fixing — and Volex Forge returns a two-part clamp as a STEP for machining or an STL to print.

The bore matches your tube and the two halves meet cleanly, so the clamp holds without crushing or slipping.

Free to try Parts from £2.99 STEP · STL · DXF FEA-verified

What you get

From a plain-English prompt

25 mm tube clamp with footExample — your parameters, your file
a pipe clamp for 25mm outside diameter tube, 20mm wide, M5 bolt
ParameterValue
Bore (tube OD)25.0 mm
Band outside diameter31.0 mm
Width20.0 mm
Clamping boltOne M5 clearance hole, ø5.6 mm, through both ears
Slit2.0 mm, cut through the band
Across the bolting ears44.5 mm
ExportSTEP / STL
Every part is checked before you download it — geometry, and where relevant FEA against textbook theory. See the verification report.

Frequently asked

Does it come as two parts, or with a mounting foot?
Neither, from this template: it is a single band with a slit and no foot, and the table lists what is there. A two-piece clamp, or a band with a bolt-down foot, goes through Forge's AI path — describe it and check the result.
Does it come as two parts, or with a mounting foot?
Neither, from this template: it is a single band with a slit and no foot, and the table lists what is there. A two-piece clamp, or a band with a bolt-down foot, goes through Forge's AI path — describe it and check the result.
Will it fit my exact tube?
Yes — the bore is set to the tube outside diameter you give, with a little grip allowance.
Can it have a mounting foot?
Yes, ask for a base foot with mounting holes and it's built into the lower half.
Print or machine?
Print the STL for light duty; machine the STEP in metal for structural clamps.
Cost?
Free to try; parts from £2.99.

More Forge generators

A clamp that grips your tube.

Free to try · parts from £2.99 · STEP, STL or DXF · every part verified before download.

Generate it in Forge →