Volex Labs / Forge / Cam profile generator — text to CAD.

Cam profile generator — text to CAD.

Describe the cam — base circle, lift, and the motion (rise, dwell, fall) with the follower type — and Volex Forge builds the profile and returns a STEP solid or a 1:1 DXF for machining or cutting.

The profile is generated from the motion law you name, so the follower moves the way you intended without hand-plotting points.

Free to try Parts from £2.99 STEP · STL · DXF FEA-verified

What you get

From a plain-English prompt

Disc cam, 10 mm lift, 90° dwellExample — your parameters, your file
a disc cam, 40mm base circle, 10mm lift, 10mm wide, 8mm bore
ParameterValue
Base circleø40.0 mm
Lift10.0 mm
Rise / dwell / return90° / 90° / 90° — fixed in this generator
MotionSimple harmonic — cosine rise and return
Boreø8.0 mm
Width10.0 mm
Measured across the lobe50.0 mm
ExportSTEP / DXF
Every part is checked before you download it — geometry, and where relevant FEA against textbook theory. See the verification report.

Frequently asked

Can I set my own rise and dwell angles?
Not in this generator. It builds 90° rise, 90° dwell, 90° return whatever angles a prompt names, which is why the table states them as fixed rather than echoing your numbers back. For a different timing, describe it and the prompt goes to Forge's AI path — and check the profile against your follower motion before you cut it.
Can I set my own rise and dwell angles?
Not in this generator. It builds 90° rise, 90° dwell, 90° return whatever angles a prompt names, which is why the table states them as fixed rather than echoing your numbers back. For a different timing, describe it and the prompt goes to Forge's AI path — and check the profile against your follower motion before you cut it.
Can I define the motion law?
Yes — name simple harmonic or cycloidal motion for the rise and return and Forge generates the matching profile.
Roller or flat follower?
Both. Tell Forge the follower type and it offsets the profile correctly for a roller.
Can I get a 2D DXF to wire-cut?
Yes — the profile exports as a closed 1:1 DXF as well as the STEP solid.
Price?
Free to try, parts from £2.99.

More Forge generators

A cam that moves the follower right.

Free to try · parts from £2.99 · STEP, STL or DXF · every part verified before download.

Generate it in Forge →